Energy-saving coating PROTERM ANTI-CONDENSATE

Energy-saving coating PROTERM ANTI-CONDENSATE

Thermal insulation material, which prevents condensation on the surface.

This modification was developed to solve the problem of condensate formation on the surfaces of household appliances and industrial equipment made of metal, plastic, etc.

Special properties of the PROTERM ® coatingmake it irreplaceable in the construction of water supply systems: it retains temperature and prevents the formation of condensation on pipes with cold water.

The recommended thickness of the coating should be at least 3-4 mm.

Modification of PROTERM ® ANTI-CONDENSATE is successfully applied with the necessary thermal insulation:

internal cold water supply systems;

at the device of systems of ventilation and air-conditioning in inhabited and public premises;

objects and technological equipment at the enterprises of oil and gas industry;

cooling systems in refrigerators.

Energy-saving coatings PROTERM ® can be applied with paint tools and airless sprayers.

Methods of application:

Pneumatic – pressure 1,5 – 3,5 atm;

Airless – pressure 80-120 bar, nozzle diameter (inch) – 0.013 0.015, 0.017;

Spray angle depending on the shape of the surface to be painted 20, 30, 40;

Hand – a roller (without pile, preferably velor) and a brush made of natural fibers.

When applied to the surface, a smooth wet film should be formed without omissions, streaks, shakiness and other defects.

Main parameters of use:

Applied at ambient temperature: from + 10 ° C to + 45 ° C, relative air humidity not more than 80%;

It is forbidden to paint on a damp surface and at a wind speed of more than 10 m / s;

It is applied on surfaces with temperature: from + 10 ° C to + 45 ° C, the temperature of the surface to be painted should be 5 ° C above the dew point;

Recommended thickness of one wet layer: 0.5 mm – 1.0 mm ;

Interval overlap at t in = + 20 ° C: 24 hours;

Theoretical consumption of the material: 1,2-1,5 l / m 2 ; 0,5-0,7 kg / m 2 – with a layer thickness of 1 mm;

The main color of the coating is white, it is allowed to tint according to RAL;

The solvent is water;

After drying, the coating layer operates in the temperature range: -30 ° C to + 45 ° C;

Transportation conditions: + 7 ° C to + 40 ° C.

The PROTERM ® ANTI-CONDENSATE material must be stored in closed, ventilated areas.

The products are packaged in plastic, hermetically sealed buckets, with a volume of 5, 10 and 20 liters.

The shelf life of the prepacked material, if all conditions are met, is 12 months.

Translate »