Energy-saving coating PROTERM ANTICOR

Energy-saving coating PROTERM ANTICOR

Thermal insulation material for the treatment of surfaces susceptible to corrosion.

PROTERM ®ANTIKOR, when applied, converts rust to surfaces that are susceptible to aggressive environments, are operated in high humidity conditions or poorly prepared for further processing.

To save money, the material is applied as the first layers. Then you can use PROTERM ®STANDARD.

Modification of PROTERM ® ANTIKOR contributes to:

thermal insulation and corrosion protection of all kinds of metal surfaces susceptible to corrosion; insulation and corrosion protection of domestic and industrial pipelines; prolongation of service life of metal structures and objects, such as: garages, hangars; heat insulation of various types of transport and containers. Energy-saving coating PROTERM ® ANTICOR:

It has a high adhesion to metal surfaces; resistant to the effects of ultraviolet rays, alkalis and salt water solutions; can be applied to a rusty surface, without prior priming; Do not let the moisture in the enclosing structure, thereby preserving the surface in an ideal state for many years; isolates hard-to-reach places thanks to a thin layer of application; It does not create an additional load on the insulated surface due to the minimum weight and minimum thickness of the applied layer; creates an even, elastic surface and aesthetic appearance.

Energy-saving coatings PROTERM ® can be applied with paint tools and airless sprayers .

Methods of application:

Pneumatic – pressure 1,5 – 3,5 atm;

Airless – pressure 80-120 bar, nozzle diameter (inch) – 0.013 0.015, 0.017;

Spray angle depending on the shape of the surface to be painted 20, 30, 40;

Manual – roller (without pile, preferably velor) and brushes made of natural fibers;

When applied to the surface, a smooth wet film should be formed without omissions, streaks, shakiness and other defects.

Main parameters of use:

The material is applied at ambient temperature: from + 7 ° C to + 40 ° C, relative air humidity is not more than 80%;

It is forbidden to paint on a damp surface and at a wind speed of more than 10 m / s;

It is applied on surfaces with temperature: from + 7 ° C to + 150 ° C;

Recommended thickness of one wet layer: 0.5 mm – 1.0 mm ;

Recommended interval of overlapping at t в = + 20 ° С: 24 hours;

Theoretical consumption of the material: 1,2-1,5 l / m 2 ; 0,5-0,7 kg / m 2 – with a layer thickness of 1 mm;

The main color of the coating is white, it is allowed to tint according to RAL;

The solvent is water;

After drying, the coating layer operates in the temperature range: -40 ° C to + 200 ° C;

Transportation conditions: + 7 ° C to + 40 ° C.

The PROTERM ® ANTICOR must be stored in closed, ventilated areas.

The products are packaged in plastic, hermetically sealed buckets, with a volume of 5, 10 and 20 liters.

The shelf life of the prepacked material, if all conditions are met, is 12 months ..

Translate »