Energy-saving coating PROTERM BIOCIDE

Energy-saving coating PROTERM BIOCIDE

Thermal insulation material, eliminating fungus and mold, preventing their appearance on the surface.

Material PROTERM ® BIOCIDE – modification of the PROTERM ® series, which includes antifungal components. Used for the warming of surfaces that are prone to the fatal effects of fungi, mold and small insects.

After PROTERM ® coating BIOCIDE and its complete drying surface become resistant to weathering. If necessary, the surface treated with an energy-saving coating can be painted with high-quality facade paint, applied decorative facade coatings, which do not create a significant load on the coating.

Coverage when applied to the walls of buildings operates a heat insulator, keeping heat in the premises; as a waterproofing, preventing the penetration of moisture into the cracks and cracks; as a façade paint, covering the walls with an even vapor-permeable layer. PROTERM ®The biocide is intended for application on the surface of buildings and structures, its viscous consistency is easily applied to vertical walls. A dry layer of heat-insulating material forms on the walls of buildings and structures a durable elastic coating.

The PROTERM ® BIOICIDE coating can be applied both outside and indoors, since the material is completely safe for human and animal health. Application of energy-saving coating PROTERM ®Biocides gives simultaneous achievement of several goals:

The possibility of using coatings throughout the perimeter of the building both inside and outside;

reduction of labor, time and financial investments for repair and construction works;

preservation of the initial load on building structures;

optimization of the temperature regime inside the building;

When using the energy saving coating on the inside walls, retained amount of useful space area;

The possibility of applying a coating on facades with a complex design and preserving the historical appearance of buildings.

Energy-saving coatings PROTERM ® can be applied with paint tools and airless sprayers.

Methods of application:

Pneumatic – pressure 1,5 – 3,5 atm;

Airless – pressure 80-120 bar, nozzle diameter (inch) – 0.013 0.015, 0.017;

Spray angle depending on the shape of the surface to be painted 20, 30, 40;

Manual – roller (without pile, preferably velor) and brushes made of natural fibers;

When applied to the surface, a smooth wet film should be formed without omissions, streaks, shakiness and other defects.

Main parameters of use:

Applied at ambient temperature: from + 7 ° C to + 40 ° C, relative air humidity not more than 80%;

It is forbidden to paint on a damp surface and at a wind speed of more than 10 m / s;

It is applied on surfaces with temperature: from + 7 ° C to + 40 ° C, the temperature of the surface to be
painted should be 5 ° C above the dew point;

Recommended thickness of one wet layer: 0.5 mm – 1.0 mm ;

Recommended interval of overlapping at t в = + 20 ° С: 24 hours;

Theoretical consumption of the material: 1,2-1,5 l / m 2 ; 0,5-0,7 kg / m 2 – with a layer thickness of 1 mm;

The main color of the coating is white, it is allowed to tint according to RAL;

The solvent is water;

After drying, the coating layer operates in the temperature range: -40 ° C to + 40 ° C;

Transportation conditions: + 7 ° C to + 40 ° C.

The PROTERM ® BIOOCIDE material should be stored in closed, ventilated areas.

The products are packaged in plastic, hermetically sealed buckets, with a volume of 5, 10 and 20 liters.

The shelf life of the prepacked material, if all conditions are met, is 12 months.

Translate »