Energy-saving coating PROTERM NORD

Energy-saving coating PROTERM NORD

The newest modification, designed for the insulation of residential buildings and structures, industrial plants, and various surfaces in winter conditions.

Attention! The material is applied at an ambient temperature of -30 ° C to + 35 ° C. At temperatures above + 7 ° C, we recommend using the PROTERM ® FRONT.

This coating is intended for application to various surfaces operating under low temperature conditions. The material acts as a heat insulator, keeping heat in the rooms; as a waterproofing, preventing the penetration of moisture into the cracks and cracks; as a façade paint, covering the walls with an even vapor-permeable layer. This modification of the PROTERM ® coatingIt is designed specifically for concrete surfaces, its viscous consistency is easily applied to vertical walls. A dry layer of heat insulator forms a strong polymer coating on the walls of the building.

In addition to energy-saving properties, the coating of PROTERM ® NORD has a combination of watertightness and the opposite property – its polymerized surface is able to “breathe”, that is, it is vapor-permeable, like the most high-quality silicone-based facade paints.

Walls treated with energy-saving coating PROTERM ® NORD, in the cold season, they conserve heat by 30-40% more than before coating and practically do not heat on hot days, since the coating can reflect up to 90% of the sun’s radiation.

Application of thermal insulation coating PROTERM ®The NORD achieves the following objectives:

the possibility of using coatings around the perimeter of the building from the outside;

reduction of labor, time and financial investments for repair and construction works;

preservation of the initial load on building structures;

optimization of the temperature regime inside the building;

The possibility of applying a coating on facades with a complex design and preserving the historical appearance of buildings.

Energy-saving coatings PROTERM ® can be applied by air and airless sprayers.

Methods of application:

Pneumatic – pressure 1,5 – 3,5 atm;

Airless – pressure 80-120 bar, nozzle diameter (inch) – 0.013 0.015, 0.017;

Spray angle depending on the shape of the surface to be painted 20, 30, 40;

When applied to the surface, a smooth wet film should be formed without omissions, streaks, shakiness and other defects.

Main parameters of use:

Applied at ambient temperature: -30 ° C to + 35 ° C, relative air humidity not more than 80%;

It is forbidden to paint on a damp surface and at a wind speed of more than 10 m / s;

It is applied on surfaces with temperature: -30 ° C to + 35 ° C, the temperature of the surface to be painted should be 5 ° C above the dew point;

Recommended thickness of one wet layer: 0.5 mm – 1.0 mm ;

Interval overlap at t in = + 20 ° C: 4 hours;

Theoretical consumption of the material: 1,2-1,5 l / m 2 ; 0,5-0,7 kg / m 2 – with a layer thickness of 1 mm ;

The main color of the coating is white, it is allowed to tint according to RAL ;

The solvent is orthoxylene ;

After drying, the coating layer operates in the temperature range: -60 ° C to + 200 ° C ;

Transportation Conditions: -30˚S to + 30ºC .

Material PROTERM ® NORD must be stored in closed fire-explosion-proof premises.

The products are packaged in metal, hermetically sealed buckets, with a volume of 3, 10 and 20 liters.

The shelf life of the prepacked material, if all conditions are met, is 12 months.

Translate »