Energy-saving coating PROTERM STANDARD

The basic material modification is intended for thermal insulation of pipes, metal structures, roofs, window frames, including PVC windows, as well as any surfaces made of “non-breathing material” (metal, polymers , etc.)

Energy-saving coating PROTERM STANDARD

This coating surpasses all known heat insulators not only in terms of application possibilities, but also in its unique properties.

PROTERM ® coating STANDARD is used to solve the main tasks with the necessary thermal insulation:

external and internal systems of hot and cold water supply; at the device of steam pipelines; at the device of systems of ventilation and air-conditioning in inhabited and public premises; objects and technological equipment at the enterprises of oil and gas industry; cooling systems in refrigerators.

The special properties of the energy-saving coating PROTERM ® make it indispensable for the installation of water supply systems: it keeps the temperature of hot pipes and prevents the formation of condensation on pipes with cold water, which is required by the norms of construction.

Energy-saving coatings PROTERM ® can be applied with paint tools and airless sprayers.

Methods of application:

Pneumatic – pressure 1,5 – 3,5 atm;

Airless – pressure 80-120 bar, nozzle diameter (inch) – 0.013 0.015, 0.017;

Spray angle depending on the shape of the surface to be painted 20, 30, 40;

Manual – roller (without pile, preferably velor) and brushes made of natural fibers;

When applied to the surface, a smooth wet film should be formed without omissions, streaks, shakiness and other defects.

Main parameters of use:

The material is applied at ambient temperature: from + 7 ° C to + 40 ° C, relative air humidity is not more than 80%;

It is forbidden to paint on a damp surface and at a wind speed of more than 10 m / s;

It is applied on surfaces with temperature: from + 7 ° C to + 150 ° C;

Recommended thickness of one wet layer: 0.5 mm – 1.0 mm ;Recommended interval of overlapping at t в = + 20 ° С: 24 hours;

Theoretical consumption of the material: 1,2-1,5 l / m 2 ; 0,5-0,7 kg / m 2 – with a layer thickness of 1 mm;

The main color of the coating is white, it is allowed to tint according to RAL;

The solvent is water;

After drying, the coating layer operates in the temperature range: -40 ° C to + 200 ° C;

Transportation conditions: + 7 ° C to + 40 ° C.

Material PROTERM ® STANDARD must be stored in closed, ventilated areas.

The products are packaged in plastic, hermetically sealed buckets, with a volume of 5, 10 and 20 liters.

The shelf life of the prepacked material, if all conditions are met, is 12 months. 

Translate »